Zvikamu zviviri zvakakwirira zvakakura zvekuvaka pendi, yakanakisa inopokana nemvura yegungwa, makemikari, kupfeka uye cathodic disbandment.
Features
Yakanakisa adhesion & anti corrosion performance, yakanakisa cathodic disbandment kuramba.
Yakanakisa abrasion resistance.
Kunyanya kunyudzwa mumvura;yakanaka makemikari kuramba.
Yakanakisa michina zvinhu.
Marine heavy anti-corrosion coatings, semamwe ese epoxy pendi, pamwe choko uye kupera kwenguva yakareba kuratidzwa mumhepo yakadzika.Zvisinei, chiitiko ichi hachikanganisi maitiro e-anti-corrosion.
DFT 1000-1200um inogona kusvikwa neiyo imwechete layer, haizokanganisa kunamatira uye anti-corrosion kuita.Izvi zvinorerutsa maitiro ekushandisa uye nekunatsiridza kugona.
Zvekushandiswa zvakajairika, ukobvu hwefirimu hunokurudzirwa huri pakati pe500-1000 um.
Inokurudzirwa kushandiswa
Kuchengetedza zvivakwa zvesimbi munzvimbo dzinotyisa, senge nzvimbo dzepasi pemvura dzezvivakwa zvekumahombekombe, zvimiro zvemirwi, kudzivirira kwemadziro ekunze kwepombi dzakavigwa, uye kuchengetedzwa kwesimbi munzvimbo dzakaita sematangi ekuchengetera, zvidyarwa zvemakemikari, uye zvigayo zvemapepa.
Kuwedzera yakakodzera isiri-inotsvedza aggregate inogona kushandiswa senge isiri-inotsvedza deck coating system.
Kupfeka kumwechete kunogona kusvika kune yakaoma firimu ukobvu hweanopfuura 1000 microns, iyo inorerutsa zvakanyanya maitiro ekushandisa.
Mirayiridzo Yekushandisa
Substrate uye kurapwa kwepamusoro
Simbi:Nzvimbo dzese dzinofanirwa kunge dzakachena, dzakaoma uye dzisina zvinosvibisa.Mafuta uye girizi zvinofanirwa kubviswa zvinoenderana neSSPC-SP1 solvent yekuchenesa standard.
Usati waisa pendi, nzvimbo dzese dzinofanirwa kuongororwa uye kurapwa zvinoenderana ne ISO 8504: 2000 standard.
Surface Treatment
Sandblasting yekuchenesa nzvimbo kusvika kuSa2.5 (ISO 8501-1: 2007) nhanho kana SSPC-SP10, kushata kwepamusoro 40-70 microns (2-3 mils) inokurudzirwa.Kuremara kwepamusoro kunoratidzwa kuburikidza nejecha rinofanirwa kuiswa jecha, kuzadzwa mukati kana kurapwa nenzira yakakodzera.
Iyo yakatenderwa pekutanga nzvimbo inofanirwa kuve yakachena, yakaoma, uye isina munyu unonyungudika uye chero zvimwe zvinosvibisa pamusoro.Maprimers asina kubvumidzwa anofanira kucheneswa zvachose kusvika paSa2.5 level (ISO 8501-1:2007) nejecha.
Bata kumusoro:Inokodzera kupfekedza pane imwe yakasimba uye yakakwana yekuchembera layer.Asi diki diki bvunzo uye ongororo inodiwa usati washandisa.
Dzimwe nzvimbo:ndapota bvunza ZINDN.
Inoshanda uye Kurapa
● Ambient nharaunda tembiricha inofanira kubva minus 5 ℃ kusvika 38 ℃, hukama hwemhepo humidity haifaniri kudarika 85%.
● Substrate tembiricha panguva yekushandiswa uye kurapa inofanira kuva 3℃ pamusoro pedova.
● Kushandisa kunze kunorambidzwa mumamiriro ekunze akaoma semvura, mhute, chando, mhepo ine simba uye huruva huru.Munguva yekurapa kana iyo yekuputira firimu iri pasi pehunyoro hwepamusoro, amine salt inogona kuitika.
● Condensation panguva kana pakarepo mushure mekushandisa kunozoguma nekugomara kwepamusoro uye kushata-yemhando yekunamatira layer.
● Kukurumidza kuwana mvura isingayerere kunogona kukonzera kuchinja kwemavara.
Upenyu hwehari
| 5℃ | 15 ℃ | 25℃ | 35℃ |
| 3hrs | 2hrs | 1.5hrs | 1hr |
Maitiro ekushandisa
Airless spray inokurudzirwa, nozzle orifice 0.53-0.66 mm (21-26 Mili-inch)
Iyo yakazara dzvinyiriro yemvura inobuda pamuromo haina kuderera pane 176KG/cm²(2503lb/inch²)
Mhepo spray:Recommended
Brush/Roller:Inokurudzirwa kune diki nharaunda application uye stripe jasi.Multiple coatings inogona kudikanwa kuti uwane iyo yakatsanangurwa firimu ukobvu.
Spray parameters
| Maitiro ekushandisa | Mhepo spray | Airless spray | Brush/Roller |
| Spray pressure MPA | 0.3-0.5 | 7.0-12.0 | —— |
| Mutete (nehuremu %）/%) | 10-20 | 0-5
| 5～20 |
| Nozzle orifice | 1.5-2.5 | 0.53-0.66 | —— |
Kuomesa & Kurapa
Zhizha kurapa mumiririri
| Tembiricha | 10°C(50°F) | 15°C(59°F) | 25°C(77°F) | 40°C(104°F) |
| Pamusoro-yakaoma | 18 maawa. | 12 maawa. | 5 maawa. | 3 maawa. |
| Kuburikidza-yakaoma | 30 maawa. | 21 maawa. | 12 maawa. | 8 maawa. |
| Recoating Interval (Min.) | 24 maawa. | 21 maawa. | 12 maawa. | 8 maawa. |
| Recoating Interval (Max.) | 30 mazuva | 24 mazuva | 21 mazuva | 14days |
| Recoat zvakazoitika coating | Unlimited.Usati waisa bhachi repamusoro rinotevera, nzvimbo yacho inofanira kunge yakachena, yakaoma uye isina zinc munyu uye zvinosvibisa. | |||
Nguva yechando yekurapa mumiririri
| Tembiricha | 0°C(32°F) | 5°C(41°F) | 15°C(59°F) | 25°C(77°F) |
| Pamusoro-yakaoma | 18 maawa. | 14 maawa. | 9 maawa. | 4.5 maawa. |
| Kuburikidza-yakaoma | 48 maawa. | 40 maawa. | 17 maawa. | 10.5 maawa. |
| Recoating Interval (Min.) | 48 maawa. | 40 maawa. | 17 maawa. | 10.5 maawa. |
| Recoating Interval (Max.) | 30 mazuva | 28 mazuva | 24 mazuva | 21 mazuva |
| Recoat zvakazoitika coating | Unlimited.Usati waisa bhachi repamusoro rinotevera, nzvimbo yacho inofanira kunge yakachena, yakaoma uye isina zinc munyu uye zvinosvibisa. | |||
Yakatangira & Zvinokonzera coating
Marine heavy anti-corrosion coating inogona kuiswa zvakananga pamusoro pesimbi yakarapwa.
Majasi akatangira:Epoxy zinc yakawanda, Epoxy zinc phosphate
Cosequent jasi (topcoats):Polyurethane, Fluorocarbon
Kune mamwe akakodzera ekutanga / pendi yekupedzisa, ndapota bvunza neZindn.
Packaging, Kuchengeta uye manejimendi
Packing:Nheyo (24kg), mushonga wekurapa (3.9kg)
Flash point:>32℃
Kuchengeta:Inofanirwa kuchengetwa maererano nemitemo yehurumende yemunharaunda.Nzvimbo yekuchengetera inofanira kunge yakaoma, inotonhorera, inofefetera zvakanaka uye kure nekupisa nemoto.Chigaba chekuputira chinofanira kuvharwa zvakasimba.
Sherufu hupenyu:1 gore pasi pemamiriro akanaka ekuchengetedza kubva panguva yekugadzirwa.