Zviviri zvikamu zve polyamide adduct yakarapwa, yakakwira solids, yakakwira kuvaka epoxy pendi ine kumira zvakanaka kumvura, mafuta, makemikari, uye kukanganisa uye abrasion resistance properties.
Features
1.Kunyanya kupikisa mvura uye kusagadzikana kwemarara.
2.Good chemical resistance uye mafuta kuramba.
3.Kunamatira kwakanaka, kukanganisa kupikisa, kupfeka kusagadzikana
Inokurudzirwa kushandiswa
Nekudzivirira kwesimbi uye kongiri munzvimbo dzinotyisa zvakanyanya, inogona kushandiswa sejasi repakati kana sejasi repamusoro rezvivakwa zvemukati.
Mirayiridzo Yekushandisa
Substrate uye kurapwa kwepamusoro
STeel:kuputika kwacheneswa kuSa2.5 (ISO8501-1) kana kushoma SSPC SP-6, kuputika mbiri Rz50μm~100μm (ISO8503-1) kana mudziyo wemagetsi wacheneswa kuita kushoma ISO-St3.0/SSPC SP3
Nzvimbo dzese dzichaputirwa dzichave dzakachena, dzakaoma uye dzisina tsvina, uye dzichaongororwa nekubatwa zvinoenderana ne ISO8504.
Pre-coated workshop primer:Welds, firework calibration uye kukuvadzwa kunofanira kunge kuri kuputika kwacheneswa kusvika kuSa2.5 (ISO8501-1), kana mudziyo wemagetsi wacheneswa kuSt3.0.
Thoraiti:Nyatsobvisa girizi pamusoro uye bvisa munyu uye imwe tsvina.
Concrete surface:Kuisa chisimbiso chakakodzera kuvhara maburi epamusoro pamberi pekushandisa.
Opamusoro pe:ndapota bvunza ZINDN.
Inoshanda uye Kurapa
● Ambient nharaunda tembiricha inofanira kubva minus 5 ℃ kusvika 38 ℃, hukama hwemhepo humidity haifaniri kudarika 85%.
● Substrate tembiricha panguva yekushandiswa uye kurapa inofanira kuva 3℃ pamusoro pedova.
● Kushandisa kunze kunorambidzwa mumamiriro ekunze akaoma semvura, mhute, chando, mhepo ine simba uye huruva huru.
Upenyu hwehari
| 5℃ | 15 ℃ | 25℃ | 35℃ |
| 4hrs | 3hrs | 2hrs | 1.5hrs |
Maitiro ekushandisa
Airless spray, air spray haina kukurudzirwa.
Brush uye roller coating zvinongokurudzirwa kune mitsetse jasi, diki nzvimbo yekuputira kana kugadzirisa.
Application parameters
| Maitiro ekushandisa | Unit | Airless spray | Brush/Roller |
| Nozzle orifice | mm | 0.43 ~ 0.53 | —— |
| Nozzle pressure | kg/cm2 | 150～200 | —— |
| Mutete | % | 0～10 | 5～10 |
Kuomesa & Kurapa
| Substrate pamusoro tembiricha | 5℃ | 15 ℃ | 25℃ | 35℃ |
| Pamusoro-yakaoma | 16hrs. | 8hrs. | 4hrs. | 2hrs. |
| Kuburikidza-yakaoma | 48hrs. | 24hrs. | 12hrs. | 6hrs. |
| Kunyatsopora | 14days | 10days | 6days | 4days |
| Recoating interval nguva (Min.) | 48hrs | 24hrs. | 12hrs. | 6hrs. |
| Recoating interval nguva (Max.) (no.2 layer) | 14days | 10days | 6days | 4days |
| Recoating interval nguva (Max.) (Koti) | 30days | 20days | 14days | 7days |
Yakatangira & Zvinokonzera coating
Yakatangira jasi:Epoxy zinc phosphate, Epoxy zinc rich, Epoxy primer, inogonawo kuiswa yakananga pane simbi yepasi inoputika yakacheneswa kuSa2.5 (ISO8501-1).
Zvinotevera jasi:Epoxy topcoat, Polyurethane, Fluorocarbon, Polysiloxane... nezvimwewo
Kurongedza & Kuchengeta
Packing:base 24kg, kurapa mumiririri 4kg
Flash point:>25℃(Musanganiswa)
Kuchengeta:Inofanirwa kuchengetwa maererano nemitemo yehurumende yemunharaunda.Nzvimbo yekuchengetera inofanira kunge yakaoma, inotonhorera, inofefetera zvakanaka uye kure nekupisa nemoto.Chigaba chekuputira chinofanira kuvharwa zvakasimba.
Sherufu hupenyu:1 gore pasi pemamiriro akanaka ekuchengetedza kubva panguva yekugadzirwa.